I have a 2811 router with IP Inspect enable for Ingress traffic but it is quite generic:ip inspect name firewall tcpip inspect name firewall udpip inspect name firewall icmpip inspect name firewall dnsint Serial1/1ip inspect firewall out Inspection n...

We have multiple 65xx's that I'd like to setup for Smart Call Home. All the 65xx's have private IP's on the loopback interfaces, so I installed the CTG software on a machine with a public address. So do I configure all the devices to point to the C...

On the TACACS+ Administration Report, there is a reason column. Does anyone know how I would use this?I'm looking for a solution to this problem. We have multiple scripts that log into our routers for various reasons. Instead of having to create 7...

I am using a Cisco ACS server with an RSA server behind it. When the user is authenticated from the ACS server, I want them to go straight into enable mode, not have to type the enable mode password. What line am I missing?aaa authentication login ...

Wondering how everyone else tests their ISDN redundant network? Does anyone automate or schedule tests of your Redundant network to make sure all routes will route probably in case of a primary link failure? How often do you test? And can you do t...