I'm pretty familiar with setting up a VPN but a customer asked if we could NAT our servers to a range they provide and I'm not sure how this can be implemented.Here's our setup (sanitized):our side (10.1.1.0/24) <---> ASA <---> router <---> Internet ...

We're using an ASA 7.0 to establish L2L VPN tunnels and I'd always have the remote side initiate the tunnel (say pinging our server from one of the customer's server) but I can never get the tunnel to establish by initiating it on our side (pinging t...

We're using an ASA 7.0 to establish L2L VPN tunnels and I'd always have the remote side initiate the tunnel (say pinging our server from one of the customer's server) but I can never get the tunnel to establish by initiating it on our side (pinging t...

I have a L2L VPN tunnel from our ASA to a customer's Juniper Netscreen. The tunnel is up but whenever the SA time lifetime is reached, the tunnel resets itself (it drops the tunnel). It is able to re-establish itself automatically, but the customer...

From a host in our inside subnet, using active FTP we can connect to an FTP server out in the Internet but cannot get a list of files. Passive FTP works fine.I do have "fixup protocol ftp 21" which I thought is supposed to fix this very issue but I ...