About Mark Wagnon

Mark Wagnon · 07-06-2017

Hi All, I'm running Unity Connection 10.5. I want to reset most of our users' voice mail passwords. This is my first time using BAT, and I've created a small CSV file containing the Alias and PIN I want for each phone. It works with my test sample, b...

Mark Wagnon · 02-19-2016

Hello,I'm having some difficulty troubleshooting a fax (more likely a voice) issue on our VG-224. The VG-224 is only used for fax lines. Last summer we upgraded our voice system from Call Manager 7.x to Call Manager 10.5.2.12901-1. Our vendor had to ...

Mark Wagnon · 09-30-2013

Hello,I have a question about the shape average command on our 3845 router. Currently we have a 100 Mbps Opteman connection that we are upgrading to Gigaman. We have the policy configured as so:policy-map Shape100Meg class class-default shape averag...

Mark Wagnon · 11-09-2010

Hello All,I started poking around our ASA 5520 (I seem to have inherited the job of administrating it) and I'm seeing the following messages intermixed in the syslog:Denied ICMP type=3, code=13 from 10.35.200.9 on interface OutsideNo matching connect...

Mark Wagnon · 08-20-2010

Hello,I am trying to add switches to our CER system to assign ERLs, but for some reason the switches are not appearing. I can add the switch by going to Phone Tracking > LAN Switch Details. I follow up the add by clicking the Locate Switch-Ports butt...

Mark Wagnon · 07-06-2017

Thank you! Got it installed and looks like it will do exactly what I need. Mark

Mark Wagnon · 02-25-2016

I'm not sure if I setup/captured the correct trace. I followed the instructions at https://supportforums.cisco.com/document/126666/collecting-cucm-traces-cucm-862-tac-sr . The only changes I made were to the filters and selected Enable MTP Trace only...

Mark Wagnon · 02-22-2016

Thanks for the info David. I'll have a look and report back. Mark

Mark Wagnon · 02-19-2016

I knew I forgot something. I did just that and it was how I test the numbers they bring me instead of sitting on their fax machine and testing. The results being the same as in my original post. Calls to numbers that I can dial successfully have a d...

Mark Wagnon · 11-09-2010

Hi Mike,Options 1 sounds more like what is happening because we're not using PAT. When I issue sh run icmp, I get "icmp unreachable rate-limit 1 burst-size 1". Our issue seems to be normal activity then? I just want to make sure that we're not experi...

Member Since	‎02-19-2010 02:29 PM
Date Last Visited	‎07-23-2019 09:10 AM
Posts	17

User Statistics

User Activity

Using BAT to force password change after login in Cisco Unity Connection

Troubleshooting Analog/Fax Lines on a VG-224

Policy Map Shape Average Question

ICMP Errors on ASA 5520

Trouble Adding Switches to CER 7.0.3

Thank you! Got it installed

I'm not sure if I setup

Thanks for the info David. I

I knew I forgot something. I

Re: ICMP Errors on ASA 5520