About Ajlal Haider

Ajlal Haider · 07-24-2015

Hi All,I am trying to change the provisioning mode to TMSPE and have succesfully installed TMSPE 1.0 on TMS Appliance version 13.2.1.Now I am trying to use the migration-tool to migrate all of the existing settings to TMSPE, however, I am getting the...

Ajlal Haider · 09-24-2014

Hi all,I am doing a new CUCM setup and am having issues with Forward Busy External and Forward No Answer External. Forward Busy Internal and Forward No Answer Internal work just fine. Even the forward all to Voicemail also works when calls come from ...

Ajlal Haider · 12-16-2013

Hi,I have a Cisco 2912 (CUBE) registered to voip.ms. All the outbound calls work just fine. I am not able to make the incoming calls work. When an incoming call is places the CUBE doesn't match any incoming dial peer instead the outboud dial-p...

Ajlal Haider · 12-16-2013

Hi,I have a Cisco 2912 (CUBE) registered to voip.ms. All the outbound calls work just fine. I am not able to make the incoming calls work. When an incoming call is places the CUBE doesn't match any incoming dial peer instead the outboud dial-peer ...

Ajlal Haider · 10-03-2014

Hi Deji,Thanks so much for your support. I really appreciate you helping with this and pointing me in the right direction. I even spoke with the ITSP and suggested what you suggested and they agreed that the problem is on their side and they are work...

Ajlal Haider · 10-03-2014

Hi Suresh,You solution did the trick. I applied the sip profile and no more UPDATE messages going to the ITSP.This is plain and simple brilliant. I cannot thank you enough for your help. Even TAC was not able to provide any solution. I cannot tell yo...

Ajlal Haider · 09-30-2014

Carlo,I already have these commands configured.Thanks,AJ

Ajlal Haider · 09-30-2014

I tried to use both midcall-signaling block and midcall-signaling passthru media-change but it only allows me to use one and gives an error that the other command needs to be removed first.So I tried midcall-signalling block and media flow-through, h...

Ajlal Haider · 09-29-2014

The midcall-signalling passthru media-change command doesn't seem to be doing anything. Please see the debug below. Sep 30 02:37:51.373: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:2894705344@10.10.10.10:5060 SIP/2.0Max-Forwards: 9S...

Member Since	‎02-22-2011 07:13 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	16
Total Helpful Votes Received	5

User Statistics

User Activity

TMSPE Migration Issue

External call via SIP not going to voicemail

Unable to match incoming calls to a dialpeer

Unable to match incoming calls to a dialpeer

Hi Deji,Thanks so much for

Hi Suresh,You solution did

Carlo,I already have these

I tried to use both midcall

The midcall-signalling