About Zhi qiang Sun

Zhi qiang Sun · 12-17-2014

We have two ACS servers,they operating Primary for two system .Now,We want provide unitized authentication,but we have warries about different version of ACS.Can ACS 4.1 register to ACS 5.2 as secondary?If they can,how ?PS:Tow ACS servers has differ...

Zhi qiang Sun · 04-04-2014

We want upgrade CTS 3000 codec image from 1.5 to 1.7,but we can not find CTS.1-7-0-4709R-K9.P1.sbn from cisco website now.Do have other way to obtain the image?

Zhi qiang Sun · 11-26-2012

I can't find anything in the cisco.com about this error message: 01:22:58.286 FW[Mod 05]: Error!!! Temperature sensor number 401:22:58.286 FW[Mod 05]: Error!!! Temperature sensor number 5Someone knows this error message?Thanks

Zhi qiang Sun · 04-10-2018

you can use subintface @dfulguer wrote: We are installing SPA-5X1GE-V2 on ASR1002 and I need a redundant link from the router going to two different L2 switches. To do this, we need to configure SVI and access VLAN ports. I usually configure SPA fo...

Zhi qiang Sun · 04-07-2014

Hi pstojano, Thank you for your reply. We shipped BE6K with CUCM10.0,but CTS 3000 codes software vertion is 1.5.0 which is mismatch CUCM 10.0[Cisco TelePresence System Software Version Compatibility and Interoperability with Other Devices—1...

Member Since	‎10-11-2007 12:13 AM
Date Last Visited	‎04-12-2018 06:17 PM
Posts	5

User Statistics

User Activity

Register Secondary ACS 4.1 with Primary ACS 5.2

Upgrade CTS 3000 codec image from 1.5 to 1.7

Error message:FW[Mod 05]: Error!!! Temperature sensor number 4

Re: ASR1002, SPA-5X1GE-V2, SVI and Access VLAN

Hi pstojano, Thank you