I would like to confirm if it is possible to downgrade AP 1042 from CAPWAP to autonomous? I want to buy the AP model AIR-LAP1042N-A-K9. But i don't sure if in the future it could support this feature. Thanks in advance. Regards JOSE LUIS
Hello everybody!For budget reasons, I am planning to deploy a Wireless solution over the WAN using H-REAP, my topology will be:* WLC 5508-50 in the main Site* 03 Remotes Sites : (5) AP 1141 each/site* WAN Remote: MPLS-VPN Bw:1024, RTT< 20ms (Fr...
Hello everybody,I would like to know if the new phones 9971 and 9951 are compatible with:Cisco Unified Communications Manager Express 8.0Cisco Unified Communications Manager Business EditionCisco Survivable Remote Site Telephony Version 7.1Thanks in ...
Hello, I have a ASA5505-UL-BUN-K9 and i want to implement Anyconnect(oonly tunnel mode), but i am not sure what licenses i need. Do I should to buy a " ASA-AC-E-5505=" license? or do i need anything else?. If my ASA doesn't have "Security Plus licens...
Hello everybody,I have this topology:REMOTE: (01) C2801 + 2FXO -10usersMAIN : (01) CCME V.7.1 for 100 UsersIs it possible to configure SRST in the remote site as contingence if the CCME fails or the WAN is down?I know it isn't common this situation ...
Hi Jaime,Thanks for your comment. I tried to mean this scenario:REMOTE: IP Phones + C2801( WAN)MAIN: CCME (WAN)Where, C2801 only allows access to WAN and the remote IP Phones are registered into CCME. There is not any Cisco CallManger(like CUCM v6,7)...
Sorry, I had a problem with the web. My comment was:I know that other products such as Juniper's WXC supports Bandwidth Management. Does Cisco WAAS support it too?Bandwidth Management means: - Guarantee a minimum bandwidth for your most critical appl...