Hello,I need to setup a LAN-to-LAN VPN with an outside vendor and we are both using 192.168.80.0/24 on our internal networks.  On my side I have an ASA5510 and I have dealt with conflicts many times before by working with the vendors to NAT across th...

Hello,I am in the middle of converting over to a LWAPP infrastructure as well as converting over to using the Cisco Secure Services Client.Because I have a very large number of IOS based AP's still in service that are running LEAP with CKIP, I have a...

We recently converted our LAN-to-LAN VPN's from Cisco 3005 VPN concentrators to ASA 5510's. Everything is working correctly, except for one thing.On the remote end of the tunnel, we have a Xyplex Terminal Server. When the tunnels were on the 3005's...

We have a VPN Tunnel established between a ASA5510 at our home office and a ASA5505 at a remote office. The tunnel is working properly, however the performance across the IPSEC tunnel is very poor. The tunnel is setup so that the remote 5505 sends ...