About alessandro_t

alessandro_t · 02-26-2011

Hi all, I bought a cisco 1721, and since yesterday I have an shdsl. The 1721 has only a WIC-1T, with the V35 cable.The telecom company gave me a simple "template" configuration, where I had to set the password and the public ip (see below).Note that...

alessandro_t · 07-15-2010

Hi all, I need to set a trunk between two SRW2048 connected over a fiber link, in order to let a vlan to be shared among them. My configuration is: switch A: - default untagged VLAN 1 - custom VLAN ID 10, named "wifi" - port 47=> fiber, set as ...

alessandro_t · 02-28-2011

[the following is relevant the first configuration, on the top of the thread]The "ping" didn't work because in this particular configuration I have to use the extended command:Router#ping Protocol [ip]: Target IP address: 8.8.8.8Repeat count [5]: Dat...

alessandro_t · 02-26-2011

The following configuration works betterI can reach the router from internet with telnet!But I'm not able to ping anything from the router.. could it be a nat problem?No lan client is able to connect to internet#show runBuilding configuration...Curre...

alessandro_t · 07-20-2010

Thanks!Now it works like a sharm!Alessandro

alessandro_t · 07-15-2010

Sorry, I repost itHi all, I need to set a trunk between two SRW2048 connected over a fiber link, in order to let a vlan to be shared among them.My configuration is:switch A:- default untagged VLAN 1- custom VLAN ID 10, named "wifi"- port 47=> fibe...

Member Since	‎07-15-2010 05:56 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

base conf. for 1721

Trunk between SRW2048

Re: base conf. for 1721

Re: base conf. for 1721

Re: Trunk between SRW2048

Re: Trunk between SRW2048