George,Please use this article that eexplains about Log module settings and how to setup the syslog server. Let me know if you need anything else. http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2716Zubair
Hello,What firmware version are you using on your SPA112 ? If it is the latest version v1.1.0 then log in to the web configuration utility and navigate to Netwrok Setup > Time Settings. NTP server settings should be there. Let me know if you need hel...
Hi,I tried upgrading the device and I figured out what exactly to do when you get in to a problem like that. So lets start off once again.Snce SPA112 must get an IP first through a DHCP on WAN port. Connect the SPA 112 device according to the instruc...
Hi Matthew, I tried upgrading the firmware upgrade from v1.0.1 to v 1.2.1 and I had the same problem. The device just stopped responding. I tried that in a lab and I figured out what exactly to do when you get in to a problem like that. So lets start...