About qussay

qussay · 01-25-2013

Hello , I tried to enable QoS globalay in our 4900m switch without success , Jadrya4900M#sh verCisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICES-M), Version 15.0(2)SG1, RELEASE SOFTWARE (fc4)According to below link http://www...

qussay · 09-14-2012

Hello , I have problem with Uniqe Hash ID when print sh aaa memory Cisco-1#sh aaa memory Allocator-Name In-use/Allocated Count ---------------------------------------------------------------------------- AAA Acct Rec ch...

qussay · 09-14-2012

Hello , I have problem with one of our ASR routers , 1aaa-3-acct_low_mem_uid_faillocal7error238279: *sep 14 14:29:03.525: %%aaa-3-acct_low_mem_uid_fail: aaa unable to create uid for incoming callsdue to insufficient processor memory15 Sep 2012, 00:58...

qussay · 12-04-2011

Hello , I have problem with QOS and applied service policy to sub interfaces . I have a 7604 with supervisor engine 720 . about 700 subinterface configured on the router and for each subinterface there is an egress service policy at appllied . the pr...

qussay · 12-09-2011

Dear Richard You were right about the using of class-defualt , when remove the class-defualt from the policy-map and add another class to match ip any any the problem solved , So for final review the class-defualt match all protocols even ipv6 and as...

qussay · 12-05-2011

Dear Richards ,First of all thanks for following up , I really appreciate that .Regarding information requested currently the 720 is 3B flavored check the sh mod output below :Router#sh modMod Ports Card Type Model ...

Member Since	‎12-04-2011 09:17 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	7

User Statistics

User Activity

QoS on WS-C4900M

AAA memory

RP2 Memory

QOS on 7604

QOS on 7604

QOS on 7604