About ajshmidt2013

ajshmidt2013 · 01-26-2013

Hello Guys!I hope you can help me here.I`ve got two routers in my network.Cable Modem connected to WAN port of the first router (E4200V2), LAN cable from E4200 LAN port connected to WAN port of the 2nd router WRT54GV3 ddwrt firmware (vpn).1st subnet...

ajshmidt2013 · 01-26-2013

1st router Router address 192.168.1.1Subnet Class CGateway = IP provider default gateway 71.86.xxx.xxx2nd router WAN IP 192.168.1.100Router address 192.168.2.1Subnet Class CGateway = 192.168.2.1???

ajshmidt2013 · 01-26-2013

Alan,if I change it to 192.168.2.1 or 192.168.1.1 then I cant ping, its says Reply from 192.168.2.1 Destination host unreachable....If I change gateway to 192.168.1.100 (in advanced routing) or completely remove advanced routing on the second router ...

ajshmidt2013 · 01-26-2013

for some reason it didnt work. Still not able to comunicate. Tried to ping - 100% lossIs there any other solutions available?Thanks!

ajshmidt2013 · 01-26-2013

Hi,Thanks!Should it look like192.168.1.0255.255.255.0192.168.1.1?

Member Since	‎01-26-2013 06:33 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

Two subnets class C, cant see each other. Please help

Re: Two subnets class C, cant see each other. Please help

Re: Two subnets class C, cant see each other. Please help

Re: Two subnets class C, cant see each other. Please help

Two subnets class C, cant see each other. Please help