cluovpemb
Level 1
Level 1
Member since ‎01-25-2012
‎08-18-2017

User Statistics

  • 92 Posts
  • 0 Solutions
  • 5 Helpful votes Given
  • 5 Helpful votes Received
Recent Badges
1 Helpful Vote
50 Replies
20 Replies
10 Replies
5 Replies

User Activity

I have a pair of Cisco 891W routers, deployed one at each site.  I have site to site (L2L) IPSec VPN configured and working using crypto maps.  All traffic is allowed from one LAN to the other, as far as I know.  Today I dicovered that I need to put ...
Hi all.  As I look at the thread headings fo rthe other posts I'm struck by how simple my request must seem I hope this is an easy one!  Using 891W routers, I would like to be able to save the running-config out the WAN port (gig0).  The most common...
Hi all.  Normally for an IOS update I'll do the copy tftp: flash: process.  Yet for embedded access points on a router, for example the one I work with on the 891W router, the following seems to be the command to use: AP#archive download-sw /force-re...
Hi all, The thread title makes this sound like a big post but it's not.  If my router has say., 193 VTY lines as a maximum, but by default running-config has only a portion of those mentioned, should I set any configs I do on all lines, or just on th...
Hi all.  Recently I came to learn through trying to configure my 891 router that when configuring the zone-baesd firewall to protect SSH access to the router from the Internet, you cannot use match protocol ssh in the class map and apply an inspect a...
Community Statistics
Member Since ‎01-25-2012 04:02 AM
Date Last Visited ‎08-18-2017 03:55 AM
Posts 92
Total Helpful Votes Received 5
Helpful Votes From
Helpful Votes Given To