About aremirez

aremirez · 02-07-2014

Hello,I have the following problem, i have a WLC 5508 running version 7.3.102.0. The problem i'm facing is that when i place a call with the 7925g wireless ip phone, everything works fine, the signal is perfect and the quiality of voice. But i have a...

aremirez · 10-18-2013

Hello,I have a problema, we have several sites with switches WS-C3750-24PS-S, running versión c3750-ipservicesk9-mz.122-50.SE5.bin; Now what we are doing is that we are adding some WS-C3750V2-48PS-S and we are upgrading them to the same reléase c3750...

aremirez · 01-25-2013

Hello,I have an issue. Some clients are experiencing issues when trying to connect to my local network. We are using for security 802.1XSome clients work and some fail, and on the next day the ones that fail are working fine and some of the ones that...

aremirez · 11-15-2012

Hello guys,I have a problem, I´m trying to configure an ASA as shown in the attached scenario.I need that all inside users to go to the proxy server on DMZ and from there they will go out to the internet.Right now i have:INSIDE INTERFACEAccess-list i...

aremirez · 11-12-2012

Hello,I have a problem. I have a WLC 4400 and the problem i´m encountering is that when a user authetnicates to the private network, and then tryies to autheticate to the Guest network, it just stays there, it doens't do anything. Same way around, if...

aremirez · 11-16-2012

Hello Jennifer,Thanks for your response. So basically i will need to add a static to allow trafic from inside to dmz without being natted. I don't know what proxy server it will be, the server would be managed by another party, but in my inside hosts...

aremirez · 11-15-2012

Thanks for the help.Actually the problem was that the WLC had a wrong time and also we had on our DHCP a 24 hour lease, so we were running low on IP´s. Change the lease for 8 hours and set the time correctly and the issue got solved.Thanks.

aremirez · 06-04-2012

Hello George,Yes, we have an engineer that will be testing with air magnet and ekahau for interference.

aremirez · 11-04-2011

Hello Tarik,My switch port configuration is the following:interface FastEthernet1/0/10 switchport access vlan 55 switchport mode access switchport nonegotiate switchport voice vlan 4 switchport port-security maximum 3 switchport port-security snmp tr...

Member Since	‎09-28-2007 05:10 AM
Date Last Visited	‎05-03-2021 08:00 AM
Posts	15

User Statistics

User Activity

Issues with 7925G when roaming! Call Drops!

Issue with version c3750-ipservicesk9-mz.122-50.SE5.bin

Some clients not getting their IP address on 5508 WLC

Need help with ASA config to set up proxy on DMZ

WLC 4400 Not authetnicating between GUEST and Private networks

Need help with ASA config to set up proxy on DMZ

WLC 4400 Not authetnicating between GUEST and Private networks

Issue with IPAD 2 and Polycom RealPresence Mobile videoconferenc

Receiving the following message "Refreshing IP failed. Please re