Hi Martin,Thanks for the feedback.Good point about the resolver.pl. I will include that in the next version.Geert

Hi Graeme,I meant "sh env", not "sh ver". Sorry about that.The "Relative temperature threshold" is how close the current temperature value can be to the system major alarm before LMS triggers an alarm. The system major alarm is the threshold that tri...

Hi Graeme,The entSensorValue and CurrentValue show the current temperature value, not the temperature value that was there when the event was triggered. So although DFM is showing 46.0 DEGC now, the temperature was probably higher at the time when th...

Hi Steve,LMS does not support software management for the WLSE devices. LMS only supports Topology Services for WLSE. Here is a list of supported features:http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/device_support/...

Hi Michal,Live Graph It only monitors the interfaces that instantiated in the ifTable and have an  ifOperStatus and ifAdminStatus that are up. To check if the device is populating the ifTable correctly, go to Device Center, select the device and perf...