About MIKE CLARK

MIKE CLARK · 05-22-2017

Hi we have a 3850 which fails to boot I can see the files on the flash however it is read only so can't make any changes. If I boot from USB switch performs firmware upgrades but then fails to boot have tried booting numerous times from USB. Tried e...

MIKE CLARK · 10-13-2011

Hi,We have just got a UCS560 which apparently has to be configured using CCA otherwise it is not supported and you are unable to get support.Is that correct, there was some suggestion that if you were a CLI expert you could configure thiings using th...

MIKE CLARK · 05-25-2017

Hi Leo, This is an example using the last IOS. Cisco IOS Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version Denali 16.2.1, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2016 by Cisc...

MIKE CLARK · 05-24-2017

Hi Leo, Not sure what happened before I got hold of it, but I tried with Release Denali-16.3.1 16.03.01a the firmware was upgraded then I got these messages and the box reboots. May 22 12:46:37.258 R0/0: %PMAN-3-PROCHOLDDOWN: The process sif_mgr ha...

MIKE CLARK · 05-23-2017

Reza thanks for replying, the flash: is Read-Only so you cant format, change or delete anything I think there is a hardware fault as it makes no difference even if the Emergency-install procedure is followed which appears to format or replace the fil...

MIKE CLARK · 08-15-2011

Hi Hamish,Thanks for responding, the cable you mention seems to have a 2* SFP+ built into the twinax cable, presumably you had to add C3KX-NM-10G on the Cisco 3750X did you have to buy any SFP for either end or does the cable include all you need. W...

MIKE CLARK · 08-14-2011

Hi Guys,Did you manage to get this to work, I have 3750X which I want to connect to a HP Flex-10, if you did get it to work what did you actually end up using, currently only have the 1G module but before I get the 10G module on the cisco I would li...

Member Since	‎05-07-2011 02:19 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco 3850 stuck in rommon flash read only

UCS560 Outside Line, Ring Tone, Support

Hi Leo,

Hi Leo,

Reza thanks for replying, the

10gb cable for 3750x switch

10gb cable for 3750x switch