7.0(1.13056) Unified Personal Communicator on Outlook 2003 SP3. Missing the Toolbar and it doesn't display the Add-in. I have removed and reinstalled, and repaired the MSI, but I can't get the toolbar to display within Outlook 2003. Any ideas?
How do you enable CUE to call and External number via the CME gateway. I have the autoattendant configured, but when I choose the menu option it does not dial via a dialpeer. I coded menu option 9 to transfer to a 'parameter'. Then in the parameter ...
8 channel CAS T1 / Nortel DMS10 E&M SF / AMI - Calls come in with no digits? Calls don't come in / and I can't call out. I connect, but get an error from the Telco. controller T1 0/2/0 framing sf linecode ami ds0-group 1 timeslots 1-8 type e&m-wink-...
Is it possible to have the best of both worlds? Can I configure 12 ports as MGCP for Fax machines and the other 12 ports as SCCP for the Hookflash / polycom phones - MGCP only allows 1 Maximum Call per line.
Kim - you may be able to leverage the Num-EXP command within the router's IOS to handle your translations. http://www.cisco.com/en/US/docs/ios/12_2/voice/command/reference/vrf_g.html#wp1108117
2 Possible solutions: a.) Use a local router at the remotes with Voice Circuits(POT's or PRI) to handle outbound 911 calls. b.) Utilize CER (Cisco Emergency Responder) - This is a server based solution that can route 911 calls out a PRI. This would e...
I am getting ?Host Not Found? when browsing by the directories button on 7961?s. System version: 5.1.2.3000-2 Administration version: 1.1.0.0-1 Several hundred phones / Some phones experience - 'HOST not found' all phones are 7961's running SCCP41.8-...
A full system restart and things are back to normal. This has happened before, so we enabled the traces so that we can see if there is something more to it..