Hi,
I'm working on ACS 5.8 which is integrated with MS Active Directory.
ACS Intenal users can authenticate and get the authorizationion I have configured for them.
But I have some issues on AD users.
- All AD users can authenticate and I would like ...
Hi,
I have configured guest type so that we won't have simultanous logins and also guest will only connect from 1 device.
But it is not working well. Attached is the configuation I did.
Can anyone tell me if I did something wrong?
Thanks!
Hi,
I want to avoid to have guest user connected to my network while their account are expired.
I know that if I disconnect the cable and connect again they will not be able to login again due to the expiration.
But I want to set some purge configura...
Hi,I'm facing somme problems with the decryption configuration.I have applied a Windows 2012 R2 CA certificate to cx and activate decrytion.I 've configured decryption policy and access policy to block traffic like facebook or youtube.Everything is o...
We are installing a NAC Solution version 4.9, and we want to know which protocol between 802.1X and SNMP is recommended for discovery?We have multiple vlans for users and only one authentication vlan. Thanks in advance,Jocelyn
Hi Pradip,
Watch the video in the following link, there are some parameters (in blue color) you should take in consideration while signing the CSR by your CA.
https://supportforums.cisco.com/video/11933356/steps-enable-https-proxy-wsa-certificate-sig...
Hi Neno,
Thank you for your answer.
Assume that the guest account expire at 9:00 AM while the user is connected and the guest didn't unplug the rj45 cable. if the re-auth periodicity is set to once a day, the guest will stay connected all the day.
...
From 3 devices, I'm able to login simultanously.
I want to have 1 login on only one device.
If someone try to use the same guest account on another device, ISE will not allow the guest to get access.
Thanks!