About pt_wang

pt_wang · 02-15-2016

My customer Sourcefire 3D7120 sensor GUI admin could not login ( message : unable to authorize access) ,but ssh admin login OK. Any suggestions?

pt_wang · 07-20-2013

My customer Cat65 VSS switches down due to power.The standby Cat65 was failed, I convert it to standby then back to VSS.The standby Cat65 got the following messages then to rommon> "cisco IOS Software, s72033_sp Software (s72033_sp-ADVENTERPRISEK9-M...

pt_wang · 07-17-2013

My Cat65 can not auto-reboot now. Someone can help me?rommon 8 > dir bootdisk:Initializing ATA monitor library...Directory of bootdisk:8602 76314468 -rw- s72033-adventerprisek9-mz.122-33.SXI5.bin2 33554432 -rw- sea_console.dat2050 ...

pt_wang · 01-30-2013

I intend to create ACS local account from file. What is maximum of accounts can be in ACS 4.2?

pt_wang · 10-01-2012

My customer has various Cisco switches but only cisco 2950 switches has the problem of ping timeout or reply time is too long(average morethan 2 sec). It will cause I Network Mangement software alarm always. Anyone has this problem?

pt_wang · 07-23-2013

Anyone has suggestions?I was convert switch2 to standalone the back to VSS mode three times but the problem is still there.Switch1 show switch vir red mis "Startup Config Mismatch:Mismatch in config file between local Switch 1 and peer Switch 2: ACT...

pt_wang · 07-17-2013

rommon>i keyin resetthe first message is: System Bootstrap, Version 8.5(4)Copyright (c) 1994-2009 by cisco Systems, Inc.Cat6k-Sup720/SP processor with 1048576 Kbytes of main memorySystem Bootstrap, Version 8.5(4)Copyright (c) 1994-2009 by cisco Syst...

pt_wang · 07-17-2013

I did try this:devsetsyncresetboot bootdisk:imagefile <--------- on this command the cat65 sup720 can boot system, it is entering IOS bootdir boot <---- it is only enter rommon>, I already boot-up sup720sync reset <---- same as above

pt_wang · 10-03-2012

a) ping ttl range from 400ms up to 3000ms b) no stp problemc) speed/duplex ok.Only the traffic pass through that switch is average about 1700 packets/sec.

pt_wang · 10-02-2012

1. reload the switches is same2. The Switches CPU usage is normal (under 40% ,average)3. The 2950 is latest version of IOS.

Member Since	‎02-18-2005 05:46 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	53
Total Helpful Votes Received	1

User Statistics

User Activity

3D7120 sensor GUI could not login

Cat65 VSS standby reload due to VSL link down

Cat65 can not auto-reload

How many local accounts can be created on ACS 4.2 internal ?

2950 switch ping timeout or reply time is long( average more 2 sec)

Re: Cat65 VSS standby reload due to VSL link down

Cat65 can not auto-reload

Cat65 can not auto-reload

2950 switch ping timeout or reply time is long( average more 2 s

2950 switch ping timeout or reply time is long( average more 2 s