My customer Cat65 VSS switches  down due to power. The standby Cat65 was failed, I convert it to standby then back to VSS. The standby Cat65 got the following messages then to rommon> "cisco IOS Software, s72033_sp Software (s72033_sp-ADVENTERPRISEK9-M), Version 12 .2(33)SXI5, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Sat 23-Oct-10 02:08 by prod_rel_team Image text-base: 0x40101328, data-base: 0x4231C7C0 System detected Virtual Switch configuration... Interface TenGigabitEthernet 2/5/4 is member of PortChannel 20 Interface TenGigabitEthernet 2/5/5 is member of PortChannel 20 Active crashed three times, disabling auto-boot and dropping to rommon" This is the messages on standby Cat65: *Jul 20 23:42:28.571: %SYS-SW2_SPSTBY-5-RELOAD: Reload requested - From Active S witch (Reload peer unit). *Jul 20 23:42:30.083: %VSLP-SW2_SPSTBY-3-VSLP_LMP_FAIL_REASON:  5/4 : Link down *Jul 20 23:42:30.087: %VSLP-SW2_SPSTBY-3-VSLP_LMP_FAIL_REASON:  5/5 : Link down *Jul 20 23:42:30.087: %VSLP-SW2_SPSTBY-2-VSL_DOWN:   Last VSL interface  5/5  we nt down *Jul 20 23:42:30.091: %VSLP-SW2_SPSTBY-2-VSL_DOWN:   All VSL links went down whi le switch is in Standby role *Jul 20 23:42:30.119: %SATVS_IBC-SW2_SPSTBY-5-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP packet: (SA/DA:0x4/0x4, SSAP/DSAP:0x2/0x1, OP/SEQ:0x1E/0x15, SIG/INFO:0x1/0x502, eSA:0000.0500.0000) *Jul 20 23:42:31.231: %SYS-SW2_SPSTBY-5-RELOAD: Reload requested by Delayed Relo ad. Reload Reason: Reason unspecified. The 10G port 5/4,5/5 TenGBIC and cables is good and connected. ... View more

My Cat65 can not auto-reboot now. Someone can help me? rommon 8 > dir bootdisk: Initializing ATA monitor library... Directory of bootdisk: 8602    76314468  -rw-     s72033-adventerprisek9-mz.122-33.SXI5.bin 2      33554432  -rw-     sea_console.dat 2050    33554432  -rw-     sea_log.dat 4098    490225    -rw-     debuginfo_20130716-143729-TPE 13260    76335972  -rw-     s72033-adventerprisek9-mz.122-33.SXI6.bin 4128    139899716 -rw-     s72033-ipservicesk9_wan-mz.122-33.SXJ1.bin rommon 9 > reset System Bootstrap, Version 8.5(4) Copyright (c) 1994-2009 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory I set BOOT=bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin rommon 1 > BOOT=bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin rommon 2 > sync rommon 3 > sync rommon 4 > sync rommon 5 > reset System Bootstrap, Version 8.5(4) Copyright (c) 1994-2009 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory rommon>   rommon>  comes up  (failed) I use set command: rommon 1 > set PS1=rommon ! > LOG_PREFIX_VERSION=1 PF_REDUN_CRASH_COUNT=0 SLOTCACHE= SWITCH_NUMBER=0 CRASHINFO=bootflash:debuginfo_20130716-143729-TPE boot= NT_K=0:0:0:0 BSI=0 RANDOM_NUM=7564149 RET_2_RTS=10:00:16 TPE Thu Jul 18 2013 RET_2_RCALTS=1374112294 BOOT=bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin ?=0 Only I boot this Cat65 is keyin boot command rommon 2 > boot Initializing ATA monitor library... string is bootdisk:s72033-adventerprisek9-mz.122-33.SXI5.bin Loading image, please wait ... Initializing ATA monitor library... Self extracting the image... [OK] Self decompressing the image : ################################################# ################################################################################ ###################################################################### [OK] ... View more

                   I intend to create ACS local account from file. What is maximum of accounts can be in ACS 4.2? ... View more

                   How I  setup LAPs snmp community by WLC permanently. ... View more

How I setup on ASA to  allow only specific IPs ( peer IPs ) to connect ASA  by remote access VPN( IPsec VPN client S/W). Due to the remote access VPN, I had setup assigned IP to remote access VPN client during dialin. I try to use the IPv4 Filter, but I was failed always.               ... View more

                   Using SSLVPN on ASA5540 to internal Webservers,some of webservers can not display local language characters exactly. On those internal Webservers (those may be Big5 or UTF-8 coding or  some Websevers does/doesn't claim its Webservers coding on header), how I tune this parameters on ASA SSLVPN automatically or manual? ... View more

I had IPAD setup IPSEC Remote Access VPN to try to conect to ASA5540 and Cat65 VPN service module(V1). I works fine on Cat65 VPN service module using IPAD client, but it is fail on IPAD client connect to ASA5540.THe message should be "VPN server is no response" My laptop Cisco VPN client (Windows 7) works fine on both (Cat65 VPN module and ASA5540). There is any special setting for IPAD client on ASA5540 ? The IPAD ios version 5.1.1 The ASA5540 version 8.4(4)1 ADSM 6.4(9) The Cat65 version is quit old binding with CatOS V12.2 etc. ... View more