About nopslider

nopslider · 01-28-2013

Hi,I'm trying to configure remote access via a IPSec VPN with XAuth. The *relevant* lines of the config are below:crypto isakmp policy 10 encr aes 256 authentication pre-share group 2 lifetime 28800!crypto isakmp client configuration group VPNCLIENTS...

nopslider · 01-30-2013

The config is actually good. The problem was MTU related - which wasn't apparent due to the 'no ip unreachables' on the dialer interface.The dropped nat packets I can only put down to something I screwed up during debuging. Thanks for all the help.

nopslider · 01-28-2013

Apologies, that is in the config...I removed it when I was extracting relevnt lines. It is definetly nating, its just not letting the return traffic back in. For completeness, the current dialer config below:interface Dialer0 ip address negotiated i...

nopslider · 01-28-2013

Same issue I'm afraid. Return packets still dropped. I've also tried associating the virtual template with a Vlan interface instead of the loopback interface to no avail.

Member Since	‎01-28-2013 09:22 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

IPSec VPN with Virtual-Templates

Re: IPSec VPN with Virtual-Templates

Re: IPSec VPN with Virtual-Templates

IPSec VPN with Virtual-Templates