About rowansakul

rowansakul · 10-01-2014

Hi I'm running PI 2.1 with all the latest patches and packs but I can't get SCP Image transfers to work.When I check the suggested logs from the Jobs Dashboard (and jump into the CLI root) I see the following:[SWITCH-DEVICE]=Switch Hostname[SWITCH-A...

rowansakul · 10-16-2012

Hi,I'm trying to configure LLDP-MED between a Cat45010+E Sup7 (IOS 15.1) and Polycom CX600 Lync phones. I have created and applied the correct network policy for the interfaces.From these sites, I need to send all the correct TLVs or the phones won'...

rowansakul · 03-29-2012

Hi,I'm looking at a OTV design similar to one described in this Cisco WP:http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/white_paper_c11-644634.html#wp9001772My question is, can I use one of the newer F2 Linecards (N7K-F248XP-25) as...

rowansakul · 02-24-2012

Hi,I am trying to setup a straight forward Site-to-Site IPSec VPN between a ASA 5510 (ASA Version 8.2(3))at HQ and a Cisco 877 (12.4(24)T3) at a branch office.At the branch end I have the 192.168.244.0/24 Subnet.At the HQ end I have the 172.16.0.0/22...

rowansakul · 10-14-2014

Thanks Brandon, it's now all working as intended.Love those undocumented procedures...Cheers,Rowan

rowansakul · 10-12-2014

Hi Brandon, Would the following work?# useradd -ou 0 -g 0 [USER-NAME]# passwd [USER-NAME] [USER-PASS]

rowansakul · 10-12-2014

Hi Brandon,That's exactly the problem I'm trying to solve. Does the new user need to have any special OS permissions. I don't speak Linux too well!Regards,

rowansakul · 10-09-2014

Hi Brandon, thanks for the reply.Just to confirm your interpretation of "root cli"...is that Prime Infrastructure CLIor the RedHat OS underneath you can access by typing in "root" from the Prime Infrastructure CLIThanks

rowansakul · 10-17-2012

Hi Nick, thanks for your reply.It appears that all the TLVs for both standard LLDP and LLDP-MED are enabled by default both Globally and on an interface level (or should be), but don't appear anywhere in the configuration (including "full" and "all"...

Member Since	‎09-21-2011 05:44 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	14

User Statistics

User Activity

SCP IOS Image Upgrades in Prime Infrastructure 2.1 Failing

LLDP-MED TLV Commands & Polycom CX600

"OTV appliance on a stick" and new F2 Cards

Unable to access additional IP Range over Site-to-Site IPSec VPN

Thanks Brandon, it's now all

Hi Brandon, Would the

Hi Brandon,That's exactly the

Hi Brandon, thanks for the

Re: LLDP-MED TLV Commands & Polycom CX600