About dsymes001

dsymes001 · 06-29-2016

We are wondering if not having route entries in some of our switches (all Cisco WS-C3560-48PS switches) or not having a default gateway set could result in this issue. All these switches are setup for VOIP phones to connect to them for power (Poe) a...

dsymes001 · 01-20-2015

I rebooted my Catalyst 3560 24 port PoE switch and when it turned on only the STAT LED went green the other LEDs are off. I get no response from the console port using putty and the cable I used before this happened. I tested the cable on another s...

dsymes001 · 01-04-2015

How do I set my cisco catalyst 3560 to use a static ip instead of an ip from our DHCP server? I want to monitor it with nagios and would like it to use an ip from our static range.

changing the cisco user password · 12-26-2014

We got a Catalyst 3560 Switch and are setting it up. We have not been able to change the password for the cisco user. We must be missing a basic step. What are we doing wrong? Login as 'cisco' user.config termpassword <new password>endwrite memory...

dsymes001 · 06-29-2016

I should have included that we did try reseating the SFPs and even swapped out the SFP cable. We are wondering if we may have actually had a running config that was not copied to startup...as the switch was powered off in the process...but it seems ...

dsymes001 · 01-21-2015

This unit was purchased before I came to our company. There is no support or maint contract. I'm sure the unit is several years old...we'll call the vendor and see what they'll do..not expecting much.

dsymes001 · 01-09-2015

Here is my current config for the "SW3" which is the one I set to IP: 192.168.1.13 Current configuration : 9725 bytes!version 12.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!host...

dsymes001 · 01-06-2015

Here is the info off my VOIP phone:IP Gateway: 10.58.5.129Subnet Mask: 255.255.255.128VLAN ID: 2This is provided by the Adtran router from its dhcp I want to at least monitor the switches from Nagios (hence the desire to have them accessible via ping...

dsymes001 · 01-05-2015

Our default gateway on our LAN is the firewall 192.168.1.14. In terms of Cisco Switches: we have SW and SW3 and SW4 and Cisco24POE. Total of 4 Cisco switches. All Catalyst 3560's. The first one we got was SW and here is its config (nothing is plu...

Member Since	‎12-26-2014 07:06 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	19

User Statistics

User Activity

Disconnected switch and SFP uplink quit working and neighbor switch started failing

Catalyst 3560 24 port-PoE switch powers on but no STAT LED and console not responding

how do I set my cisco catalyst 3560 to use a static ip instead of an ip from our DHCP server?

changing the cisco user password

I should have included that

This unit was purchased

Here is my current config for

Here is the info off my VOIP

Our default gateway on our