I had the same problem in a stack of 6 C9200L switches with version 16.9.3 and Cisco has not yet determined a solution since with the currently recommended version (16.9.5) the same behavior happens.
I agree with Arumugam.I recently tried to do a VSS with two clients and they had two asymmetric 4500Xs:1x4500X-16 and 1x4500X-32
And I confirm that it is not possible to build a VSS with different hardware characteristics on both 4500X switches. So, ...
Hi Chris, yes I was able to solve the problem, although it was a combination of many steps.Originally my stacks had 6 switches and version 16.9.5, the one recommended at that time by Cisco, however, they started with the behavior. The first activity ...
The last file that switch created was: STACK1-MDF-P1#dir crashinfo:Directory of crashinfo:/7329 drwx 90112 May 9 2020 19:45:05 -05:00 tracelogs18 -rw- 1083052 May 6 2020 12:42:07 -05:00 system-report_1_20200506-124204-CDT.tar.gz20 -rw- 0 Jan 13 2019 ...
I use "archive" for the logger all changes made on the switch. At the time of the reboot, the log buffer was filled with the logs corresponding to the commands executed in the startup configuration and the reason could not be displayed, however this ...