Dear team,
We are using Cisco MDS9513 in our environment to connect the hosts and the Pure storage array.
Whenever we do any zonechanges, its affecting the other hosts paths logging in and out on the storage array.
Especially with Aix / Solaris...
My issue something looks like this.
http://www-01.ibm.com/support/docview.wss?uid=isg1IZ79845
But AIX admin says these fixes already will be applied as they are using 6100-09-09
I did checkd with AIX team and found that the host using Class 3 and Point to point or fabric.
After zoning, we were able to see the Pure volume, Once the AIX admin started installing on VIOS1 then he rebooted and the pure volume not available due to...
I did checked and found the persistent is already enabled on my MDS VSAN
VSAN 60The local switch is the Principal Switch.
Fabric A :
VSAN 50The local switch is the Principal Switch.
Local switch run time information: State: Stable Loc...
Yes, i gone through the article.It says disruptive.Also the current status of my switch. If i enable, does it affects the whole VSAN ?EMC9513-B# show fcdomain domain-list vsan 60Number of domains: 1Domain ID WWN--------- ------------...