I installed CUCM 11.5 (Publisher/Subscriber Cluster), in my configuration I enabled the Corporate Directory, and under the Parameters Enterprise : I added the URL Directories,
we have the 6941, 6961, 7791, 7931 IP Phones Types.
you find i...
I have Cisco ISR4321, CUCME v11.0, with 1 E1 controller, and 2FXS/4FXO Ports.All my SIP Phones works perfectly, and the Analog Phone for FXS Port can call the Local IP Phones, and receive the calls from local and the PSTNbut, it can't mak...
All IP Phones configured by SIP Protocol, for call security I want if someone wants to start a call to the outside (PSTN) he's obliged to enter his own PIN, Is there a way to configure that on CME 11.0 ?
I want to upgrade the IOS XE for cisco 4321 (CUCME),
when i put the reload command , it show me this message :
CME-EHM#reloadThe following license(s) are transitioning, expiring or have expired.Features with expired licenses may not work...
than you for ths Tuto,
t's very helpful for me,
but I have one question : if I have multiple endusers (for me I have 280 endusers synchronized from LDAP), how to convert them on Local User simultaniously ?
thank you again.
thank you for your reply.
I added the second digit on the DP 10 voip (destination-petern 00..) and now work perfectly.
but I have another problem :
I created 4 groups, 1- Local calls, 2- National Phones, 3-for National Mobiles, 4-for Int...
But in this one will encounter another problem, each user can make calls from each IP Phone to the outside (PSTN).I would like every user can just make PSTN calls, only by his phone or by his number.And how I can download the audios (en_ba...