About vishreekhaye

vishreekhaye · 10-16-2016

Hello, I'm having some trouble upgrading the IOS on a cisco 4321 ISR. I can see my New IOS in the directory and I have verified the IOS. (verify x) the conf reg is 0x2102 and my boot system flash points to the new IOS. (Boot System Flash: xxx) howe...

vishreekhaye · 10-20-2016

almost... boot system flash bootflash:/isr4300.... this is what worked for me

vishreekhaye · 10-18-2016

OK i think I've understood my mistake. Not sure if this is the cause yet I will post up a resolution once I've ran a second attempt. Basically entering the full path in your boot sys command boot system flash:bootflash/isr4300-universalk9.03.13.0...

vishreekhaye · 10-18-2016

Hey Matthew thanks mate, just wondering whats the difference between these two commands #copy ftp://username:password@<ip address>/filename flash: and #copy ftp://username:password@<ip address>/filename bootflash: ive tried both and on both occas...

vishreekhaye · 10-17-2016

Cheers GP Here's some output - just information based stuff... check out the attachment for more output #sh verCisco IOS XE Software, Version 03.13.02.S - Extended Support ReleaseCisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Ve...

vishreekhaye · 10-17-2016

Thanks gpauwen, back in the office now after an embarrassing failed change. I checked, rechecked and then rechecked again for typos - I'm 100% sure its not a typo. going to do some digging now.

Member Since	‎10-16-2016 05:58 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

IOS upgrade on ISR 4321 - defaulting to same IOS

almost...

OK i think I've understood my

Hey Matthew thanks mate,

Cheers GP

Thanks gpauwen,