About izhiltsov

izhiltsov · 10-19-2011

Hiwe have cisco UC540 (8.2)Extension 390 has an AutoAttendant script on CUE.After initial greeting on 390, a call is being forwarded to the extension 280 (B-ACD queue)If we make calls from the local IP-phone to extension 390, everything works fine.If...

izhiltsov · 10-06-2011

I connect to my Cisco UC540 remotely through VPN and use Cisco Communicator. This works fine, however once I connect to VPN, internet slows down significantly. Is it possible to setup the phone through VPN and the rest of the traffic through my local...

izhiltsov · 07-06-2011

Hello,I'm trying to setup phone SPA 525G2 as a teleworker phone on my Cisco UC540. While I'm in the setup master, I'm being offered to install an SSL client bundle (AnyConnect) or to download it from the Cisco website for those who doesn't have it. T...

izhiltsov · 08-12-2010

Hi GuysThe similar question is posted in another thread, but it is still unanswered. I have the same problem herehttps://supportforums.cisco.com/message/1181435?tstart=0 I work out of a Help Desk that supports about 40 VOIPs. I've just found five bad...

izhiltsov · 08-12-2010

Hi, I've just purchased a UC540 unit from Amazon. Do I need to purchase a service plan for this device to get access to the CISCO download center(for any software updates) ?Do I need the service plan to get updates for the device?

izhiltsov · 10-06-2011

Thank you very much for the prompt reply. I found this option and once I turn it on, the system asks me to enter 'network' and 'wildcardmask' information. I'm not very good with this, so could you please advise me on what needs to be entered here. M...

izhiltsov · 08-13-2010

Thanks guys, it works

izhiltsov · 08-12-2010

I've done hardware reset many times and it doesn't help at all. They download the file term70.default.loads, restart and next they are supposed to download another 7 files, but they don't do that. Instead after restarting they downlaod term70.default...

izhiltsov · 08-05-2010

yes it works! Thanks a lot!

izhiltsov · 08-02-2010

Thank you for the detailed response, but it looks like my knowledge is not enough to go through the whole process. As far as I understand phoneload is already on the flash card, but the phones still don't grab sccp firmware.

Member Since	‎06-27-2010 06:31 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	18

User Statistics

User Activity

A strange pause after greeting.

uc540 and remote VPN connection

uc540 SPA525G2 and SSL VPN

7970 Blinking lights, but that's all

UC540. Any updates included?

uc540 and remote VPN connection

Re: 7970 Blinking lights, but that's all

Re: 7970 Blinking lights, but that's all

Re: UC540 - Language Pack Problems

Re: UC540 and 7960G phones with sip firmware