Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,
We are currently seeing an issue where our CUBE dial-peers is configured to use TCP as the transport between a SIP call tester and the CUBE, but seems to switch to UDP when sending a BYE to end a call.
All other messaging between CUBE and call ...
Hi,Am i correct in assuming that on an Android client I cannot start a group chat, only participate? So an Android client user will need to be invited into a group chat from a Windows / Mac client.We are running IM&P10.0.1 and Jabber for Android 9.6....
Hi,I currently have a SF300-48 switch with two vlans on it, one for voice and one for data. The switch connects to a Watchgaurd firewall which is also doing the routing. The Mitel PBX is also connected to the switch. The switch is only configured as ...
Hi, Due to some issues with our license we were given a temp 3 month node license to activate 3 nodes in our 5 node cluster. We have now received and loaded the correct permanent licenses, but the temp license is still in use and we have a total of ...
Users changing pin via the ccmuser webpage loses all services when login back in. We see the following error message : was unable to be validated.(49) when trying to access services. User then has to change the PIN back to his old number to regain t...
Hi,We are seeing a similar issue after the user has changed their AD password the account repeatedly gets locked out when they try to log into Jabber. We are also using Cisco IM&P and our CUCM is LDAP syncedI am interested to know why you are asking ...
Hi Tom,Thanks a lot. I have one more question, currently my default gateway on the switch is set to the 192.168.5.1 address on the watchgaurd. Do I need to set anything for the voice vlan on 192.168.5.x ? How would device on that vlan get to the 192....
Hi Tom,Thanks a lot. I have one more question, currently my default gateway on the switch is set to the 192.168.5.1 address on the watchgaurd. Do I need to set anything for the voice vlan on 192.168.5.x ? How would device on that vlan get to the 192....
