About hadi.tannous

hadi.tannous · 09-19-2011

Hi,I am having this design issue with route reflectors and could use some help.I have 18 routers fully meshed in an MP-iBGP session and i am going to introduce route reflectors into the network to minimize the total number of TCP sessionsMy problem i...

hadi.tannous · 03-23-2011

HiHow can i change the boot device on IOS XR ???RP/0/5/CPU0:-12406#sho ver | in Boot deviceBoot device on node 0/1/CPU0 is mem:Boot device on node 0/3/CPU0 is mem:Boot device on node 0/4/CPU0 is disk0:Boot device on node 0/5/CPU0 is disk0:Thx

hadi.tannous · 10-27-2011

Hi Riccardo,You can set the community on the client and then on the route reflector match on it and change the attribute to which other client u likelet me know if you need the config. i just tested it yesterdayCheersHadi

hadi.tannous · 09-25-2011

I am afraid you can Let me lab it first and will get back to uHadi

hadi.tannous · 09-20-2011

Hi Riccardo,I have 18 routers in a full MP-iBGP mesh topology. Some pairs of these routers have the following policy :I have a route-map matching on Route Targets and i am setting the next hop to be different from the rest of the RT for that site.Thi...

hadi.tannous · 09-19-2011

Hi Riccardo,Thank you for your reply.Can you provide a config example ? I don't believe the reply addresses the challenge i am facingThank youHadi

hadi.tannous · 02-02-2011

for a 9600bps connection, you could get a maximum data rate of 960bits per second,Is that correct ? shouldn't it be : for a 9600bps connection, you could get a maximum data rate of 7680 bits per second ?

Member Since	‎09-22-2010 06:20 AM
Date Last Visited	‎05-01-2020 12:02 AM
Posts	8

User Statistics

User Activity

Route Reflectors Design issue

IOS XR boot device

Route Reflectors Design issue

Route Reflectors Design issue

Route Reflectors Design issue

Route Reflectors Design issue

Re: clockrate and bandwidth