About jaimeatnok

jaimeatnok · 02-16-2009

Hi Everyone,I've recently installed an MCS 7816 at a customer and it came shipped with UCM 7.0.1. I downloaded the two part 7.0.2 upgrade and burnt the ISO to a DVD.I then started installing UCM and inserted the 7.0.2 upgrade DVD when prompted for a ...

jaimeatnok · 10-09-2007

As mentioned in a previous conversation, we've got a Cisco 2821 ISR running CME 4.0(2) which is connected to an Alcatel 4200 legacy PBX. The ISR is a gateway to the PSTN so the Legacy PBX sits behind it, connected via an E1 link (Primary Rate Interfa...

jaimeatnok · 10-09-2007

I know that you can configure multiple dial-peers for a single voice-port but it seems I'm not able to achieve the functionality I'm looking for.We've got an E1 (primary rate - 30 channels) for connectivity to the PSTN which serves 100 MSNs, from "70...

jaimeatnok · 10-08-2007

Hi everyone,We've got a Cisco 2821 ISR running CME 4.0(2) which is inter-connected with a legacy Alcatel PBX (Alcatel 4200).Phones on the legacy PBX can all IP phones just by dialling their extension number but the problem I'm having is that all the ...

jaimeatnok · 04-06-2009

Hi,Turned out it was a hardware problem with the MCS so I issued a request to TAC with the SmartNET contract and for the motherboard replaced.

jaimeatnok · 11-09-2007

Thanks,Is there a BUG ID or an open case that I can track for this issue?

jaimeatnok · 11-09-2007

Sorry to re-open this thread but I'm having the same problem!When placing a call from an IP to antoher, the calling party's display shows strange characters.I'm running a 2821 ISR with IOS 12.4(15)T1 (IPVOICEK9 feature pack) and CME v4.1.Could this b...

jaimeatnok · 11-07-2007

Hi,Yesterday I upgraded the software on the ISR 2821 to the following:- IOS 12.4(11)T2 to 12.4(15)T1- CME 4.0.3 to 4.1(0)However, calls from the Legacy PBX to IP phones are still received without a Caller ID...

jaimeatnok · 11-02-2007

Yes, I thought so...for the 2821 its actually XW3 as XW4 seems to be for the UC520 and an 17xx series routers.Where could I find some sort of changelog of telephony features for IOS versions? Navigating the IOS upgrade portal is sometimes frustrating...

Member Since	‎10-08-2007 08:04 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	27
Total Helpful Votes Received	5

User Statistics

User Activity

New install of UCM 7.0.2 hangs at "Database Installation" stage

Interdigit Timeout with Legacy PBX via PRI

Multiple dial-peers for a single voice-port

No Caller ID from Legacy Alcatel PBX

Re: New install of UCM 7.0.2 hangs at "Database Installation" st

Re: IP phone display name of the called party with grabage

Re: IP phone display name of the called party with grabage

Re: Interdigit Timeout with Legacy PBX via PRI

Re: Interdigit Timeout with Legacy PBX via PRI