Hi,
I would to like to have a lookup of the called party name on my phone screen when I place an outgoing call.
I already created a end user with Telephone Number but this is not matched.
Is this possible?
Hi,
I deployed jabber in Phone only mode.
But I don't get the Contacts tap on the vertical left menu?
When I enter a name of a users in the search bar on top the user is display correctly.
Jabber-config.xml:
<config version="1.0"> <Presence>...
Hi,
Our ISP has add 10 new numbers on our PRA/E1 line.
Because the new number is not in the same region they made a redirection on ISP level.
We receive the following output:
Calling Party Number i = 0x2183, 'XXXXXXXXX' Plan:ISDN, ...
Hi ,
We have Cisco 7841 and Cisco 7945 phones in our CUCM 11.5 environment.
When I press f.e. 0 on the 7945 I get a list with all the recent call's I already called starting with a 0.
When I press 0 on the 7841 it does not show my recent called lis...
Hi,
I have the following setup. SIP trunk Provider --> Cube --> SIP trunk to CUCM.
We are having a special dial pattern to dial outside. *9*external_number. The *9* is removed on the outgoing dial leg of the CUBE.
When I make a call from my IP com...
Hi,
1. Match your dial peer on the called number - YYYYYYYYYY
--> this is not working as all the 10 new number are forwarded to same YYYYYYYYYY number.
2. Ask the telco to send you ZZZZZZZZ as the called party number
--> I will ask the telco if t...
