Dan
Level 1
Level 1
Member since ‎02-01-2013
‎02-09-2021

User Statistics

  • 18 Posts
  • 0 Solutions
  • 3 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
1 Helpful Vote
5 Replies

User Activity

I am using the AXL SOAP API to provision CSF devices for our Jabber users. We've just upgraded to CUCM 10.5.2 from 8.6.2, and i've decided it would be good practise to start setting the owner on the device.If i'm provisioning a *new* device via addPh...
I'm trying to do the above, specifically i'm trying to use AXL to automatically provision an analogue phone device on a specific port of a known VG224, but i'm running into problems (we're currently using CUCM 8.6, with the intention to upgrade to CU...
I was looking at the configuration for PLAR here:http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/bccm-801-cm/b03dn.html#wp1338158but it's causing me some problems. Specifically, if the directory number to be rung is in a pa...
We've got 2 Cisco 3900 routers running IOS 15.0(1r)M13, with a number of ISDN cards in them, as our voice gateways to our telephony circuit provider. This last month, we received a significant bill for one specific call through one gateway. On furthe...
(TL;DR at the bottom)We're in the process of rolling out VoIP across our campus. The network is divided up such that we have a router per building (about 20 buildings on site), off each of which anything from 10 to 40 edge switches hang depending on ...
Community Statistics
Member Since ‎02-01-2013 01:56 AM
Date Last Visited ‎02-09-2021 02:08 PM
Posts 18
Helpful Votes Given To