As i am adding a camera it says the server has no more space available. I turned down the streams on my HD cameras from 4000 to 3000 but do not seem to be creating anymore space. Does it take a few days to recalculate? I also have a server that ha...
I am having issues with a server after upgrade to 7.2. I am getting a null core dump critical and load average is critical. It is also spiking on physical memory and swap memory to 100% when they usually run at none or half. 7.0...
1) Warning (archive-sync) with server linux-efga: The archive a_p_s1_22-041-Business_1_-_a_regular_50 doesn't exist in Media Server, deleted from VSOM.: (occurred at 2011-10-31 12:30:59.0)2) Warning (archive-sync) with server linux-efga: The ar...
On my 5011 and 5010 cameras the image I am seeing with the service cable and a monitor is not what I am seeing in the vsom or the camera website picture. I am wondering if there is a setting I do not have right. Any help would be great. ThanksZack...
Has anyone successfully made a service cable for the 5010 / 5011 Cisco IP dome cameras? We are looking for the 2.5mm stereo jack to BNC connector and have found a pelco service cable IS-SC but it is RG174A/U and not the required RG174/U (not sure if...
We have had the same problem. we are troubleshooting by turning off the record on motion for a few days to see if it will make a difference. The weirdest this we have come accross is we had a three hour portion of an archive go missing. it was th...
With the service cable and a hand held TV i see a much wider and taller image then what i am seeing when i login to the camera through the IP to view and the VSOM. It is cutting off in the camera and vsom probably half inch of the television screen...
Has anyone found a suitable work around for this problem? Since the old version at least worked with windows 7 we have upgraded many and now it doesn't work with 6.3.23 VSM client.
