About office

office · 09-02-2011

Dear Cisco,could you please provide some snmpset commands to modify port vlan membership on SG300-28 switches?I checked http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801c6035.shtml however thisinformation is apparently onl...

office · 11-08-2011

perfect - works great!~# snmpset -v 2c -c public 1.3.6.1.2.1.17.7.1.4.3.1.5.77 i 4 1.3.6.1.2.1.17.7.1.4.3.1.1.77 s vlan77 1.3.6.1.2.1.17.7.1.4.3.1.2.77 x 0x00 1.3.6.1.2.1.17.7.1.4.3.1.3.77 x 0x00 1.3.6.1.2.1.17.7.1.4.3.1.4.77 x 0x00SNMPv2-SMI::mib-2...

office · 11-01-2011

anyone?

office · 10-10-2011

anyone?is there really no possibility to set an untagged vlan for a specific port ?

office · 09-28-2011

That sounds unbelievable...I can set the mode (Trunk/Access) via SNMP.I can create/modify/delete VLANs via SNMP.The only problem is to specify an untagged VLAN for a port in acccess mode.I found this:https://supportforums.cisco.com/message/3427878#34...

office · 09-26-2011

anyone ?

Member Since	‎09-02-2011 06:45 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

VLAN Port membership via SNMP on SG300-28 Switches

Re: VLAN Management via SNMP on SG300-10 Switches

VLAN Port membership via SNMP on SG300-28 Switches

VLAN Port membership via SNMP on SG300-28 Switches

VLAN Port membership via SNMP on SG300-28 Switches

VLAN Port membership via SNMP on SG300-28 Switches