About nurinalmas

nurinalmas · 12-30-2002

What is the best way to define OSPF areas for this OSPF environment?One Main Central site.One Disaster Recovery site.200+ branch office sites connected via point-to-point leased lines to both the Main Central & Disaster Recovery sites. (ie. we have 2...

nurinalmas · 01-05-2003

Will it be the same consideration if the setup is like this?Backup Hub Site do not have aggregation routers accepting the 200+ redundant connections from the branch offices. So I end up having a pair of routers for each spoke link. Now, I have 200+ r...

nurinalmas · 01-03-2003

I agree with you totally on all the considerations.However, I have inherited the network at its current state. The physical infrastructure and the IP addressing scheme are there and I cannot change it. Its a matter of optimizing the current network.

nurinalmas · 01-03-2003

Yes. Its a star WAN topology with leased circuits to every branch offices. The main problem is this:Disaster Recovery Site do not have an aggregation router accepting the 200+ redundant connections from the branch offices. So I end up having a pair o...

nurinalmas · 01-01-2003

From the discussions, I would probably be having the same problem. Need advice on how best to avoid it. Central site has 200+ leased line links to remote offices. Each link uses a pair of routers. End up with 200+ routers at the datacenter.How best t...

nurinalmas · 07-30-2002

Hi guys,I have exactly the same setup and currently experiencing the same ERROR message. When I tried authentication using the same RADIUS server for a TELNET connection to the router, authentication works fine. So can I say that my RADIUS configura...

Member Since	‎11-26-2000 05:21 PM
Date Last Visited	‎06-13-2021 06:13 PM
Posts	6

User Statistics

User Activity

Multiple Area OSPF with 200+ branch offices.

Re: OSPF WAN with 200+ routers in area 0 - to BGP or not to BGP

Re: Multiple Area OSPF with 200+ branch offices.

Re: Multiple Area OSPF with 200+ branch offices.

Re: OSPF WAN with 200+ routers in area 0 - to BGP or not to BGP

Re: Unable to connect - RADIUS/PPPoE