bellaireroad
Level 1
Level 1
Member since ‎11-24-2010
‎08-18-2017

User Statistics

  • 41 Posts
  • 0 Solutions
  • 50 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

I have an 1142 running in AP mode, and would like to convert a second 1142 LAP to AP. Is it possible to recover the image (c1140-k9w7.tar.124.21a.JA1) on the APand use this to upgrade the LAP?
Hello,I have created a new VLAN on a HP 3550 and use a 1941 router. the setup seems fairly straight forwardI have set the following configurationOn the switch -192.168.1.37 255.255.255.0 exitip default-gateway 192.168.1.1ip routingvlan 1   name "DEFA...
Hello, I am adding a barracuda VPN appliance to my network.  The appliance must use a class B network (192.168.0.0 255.255.0.0) - and my current configuration is class C (192.168.1.0 255.255.255.0).  I am confined to one IP address for the WAN, and  ...
Hello. I am setting up a Barracuda VPN.  Please take a look at the requirements and my config.   Is this the best way to handle this task?  Thanks These are the ports on the appliance that need access.  It also states the GRE (IP protocol 47) In/O...
can the access point be configured to do local authentication for 802.11N, or is a radius server necessary?
Community Statistics
Member Since ‎11-24-2010 09:58 PM
Date Last Visited ‎08-18-2017 03:56 AM
Posts 41