About sammycbmi

sammycbmi · 11-03-2014

We have an SG200-26 and unfortunately one of it's ports is connected to it a dumb switch. Whenever this dumb switch is disconnected and reconnected multiple things happen. 1. Port security kicks in and Dynamically locks the port even though all port...

sammycbmi · 04-14-2014

We have a SG200-26. This dumb switch is connected to a trunk port of the SG200. This dumb switch has a couple of other switches that connect to it. Another dumb another managed. I know dumb switches aren't good but that's what I have been given and h...

sammycbmi · 12-30-2013

This weekend I rebooted a bunch of network switches including our LAN SG200-26 switch. This I believe was my first reboot since upgrading to 1.3.2.2. After this reboot our Cisco Voip phones didn't connect anymore. After looking into this it turns out...

sammycbmi · 10-04-2013

OK I'll explain my setupI've got a 3560 connected to an 1841 (router on a stick) but the trunk allows only VLANs 2-5. I didn't set it that way so I assume the previous owner did that for security reasons. Well some time ago we got an SG200-26P and w...

sammycbmi · 09-23-2013

On my 3560 I was setting up an access list and transport to be used for my VTY lines. Previous owner of switch only had vty 5 15 shown in the config. VTY 0 4 was not in the config. So I set up an access list and transport on 5 15. I noticed that I co...

sammycbmi · 11-10-2014

I disabled globally this weekend. And, and this bugs me, when I disabled it it reset the ports that Smartport macros run on back to VLAN 1. I had a feeling it would do it do I wasn't surprised. I then manually set these ports to what I wanted them to...

sammycbmi · 11-05-2014

Also how do you disable port security? I'm hoping if I disable Smartport this won't still be a problem but if I pull the network cable between this switch and my dumb switch then port security will kick in. And I've adjusted the macro up to like 50...

sammycbmi · 11-05-2014

Thanks Aleksandra. This weekend I'm scheduling some time to disable Smartport globally.

sammycbmi · 11-04-2014

What are the anti-macros I see in the source? I see that they have the options of turning off port security. Why is this here and when do these anti-macros run?

sammycbmi · 11-04-2014

Thanks Michael and Aleksandra.I'm not gonna mess with altering the individual macros as Aleksandra pointed out the IP phone and desktop ones being buggy. I saw a post from a couple months ago you commented on Aleksandra.This brings up a question I h...

Member Since	‎10-19-2011 04:41 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	35

User Statistics

User Activity

SG200-26 and port security

SG200-26 port security and PVID

SG200-26 not discovering Voice VLAN

SG200-26P to 3560...

VTY lines 0 4 used even though not in config?

I disabled globally this

Also how do you disable port

Thanks Aleksandra. This

What are the anti-macros I

Thanks Michael and Aleksandra