About netadmincsm

netadmincsm · 05-04-2015

Hi allI've been facing an interrogation and want your though about this.*** See attachment for detail.***I want to know if the switch from site A will report MAC flapping issue for a MAC of the site B switchesSite A is a 3750 stack and site B is a 45...

netadmincsm · 03-18-2015

Hi,We have 300 stores with mostly the same router config.The router in each store is a cisco 891 router capable of doing QOS.Each of our store is connected to internet through a local Internet Service Provider (ISP). They all have different ISP.Each...

netadmincsm · 04-04-2014

Hi allI created a fault and event report on my syslog data. I run this report weekly. I now need to change setting in that report but I'm not able to see where to edit this report. I see my job scheduled in the list but not able to modify anything....

netadmincsm · 01-27-2014

I want to check for the existence of the following two logging serveur into my router devices. I also want to make sure there's only those two logging server in my configurationHere's my logging server10.10.10.111.11.11.1So I put those 3 lines in my...

netadmincsm · 01-27-2014

Hi AllI'm pretty sure it wasn't available on version 4.1 of prime LMS based on my research on this forum but I'm now using version 4.2 and still want to know if cisco added the possibility of filtering devices from dashboard portlet's output. (like h...

netadmincsm · 04-25-2014

Hi had to change the SDM prefer mode from routing to accessAccess SDM mode allocate more resources for security acesYou can look at your SDM mode by entering "sh sdm prefer". You can change it by using the "sdm prefer [type]" command.Hope that helps

netadmincsm · 04-08-2014

Thanks :)Had to know

netadmincsm · 04-08-2014

Thanks. But how can I delete it. I cannot even edit nor delete the report.Thanks again :)

netadmincsm · 02-20-2014

logging buffered 200000no logging consolelogging esm configlogging 10.10.10.1logging 11.11.11.1I took care of the screenshot you sent me but I'm still having the same issue. Device NameLatest VersionCreated OnCommand(s) to DeployF.D.4182535484.R001....

netadmincsm · 01-31-2014

You got it. It's the only thing I have in my template for now. I have nothing more.My thought are that prime can use the "include all" wildcard [#.*#] but only with inclusion line not exclusion. Is that make sence ?

Member Since	‎03-23-2007 11:45 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	58

User Statistics

User Activity

4500 Same MAC on all SVI interfaces

I have 300 stores and I'm looking for a global QOS config that would shape/policy the bandwith based on a % of the detected ISP link speed

delete fault and event syslog report - Prime LMS 4.2

Baseline compliance wildcard pattern

Devices filtering on Dashboard Portlet

Hi had to change the SDM

Thanks :)Had to know

Thanks. But how can I delete

Re: Baseline compliance wildcard pattern

Baseline compliance wildcard pattern