About pconnelly

pconnelly · 04-28-2009

I'm having a hard time finding information on configuring the DSP chip to transcode an incoming G729 SIP trunk call to the G711 CUE SIP trunk. Here are the commands on the CME I have regarding transcoding. What am I missing? This is an all CME con...

pconnelly · 04-15-2009

If I have two CME sites, both with 4 digits extensions, one site is 4XXX and another 5XXX. I'm trying to get it so at site 4, they can just dial the 3 digits for onsite calls and the CME will add the 4 to the 3 digit number, and so on at site 5. I ...

pconnelly · 04-29-2009

Ok, I got it working on two 2851's and a 3845, but on my 2 2801's I can't put the "dspfarm" command under the voice-card 0. This is the only difference in the config, but the PVDM's won't associate. The reason for the command not being there, I fig...

pconnelly · 04-29-2009

Thanks! I got it working finally, I needed to use use "sccp ccm 10.5.49.160 identifier 1 vesrion 7.0" and I only need one tag at the bottom. Thanks again!

pconnelly · 07-24-2007

On one of the ASAs I setup some users get the WebVPN when they logon and others get the SSL VPN. What controls which one they get?

Member Since	‎03-26-2007 02:10 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

G729 trunk to CME, transcode to CUE G711

Get CME to add digits to internal calls

Re: G729 trunk to CME, transcode to CUE G711

Re: G729 trunk to CME, transcode to CUE G711

Re: Difference between webVPN, SSL vpn and ipsec client