I am trying to use Static NAT to NAT my internal sever accessible from outside interface.I am able to NAT the switch connected directly to ASA Firewall however it doesn’t work for device hanging off from that switch.Am I doing something wrong?I have ...
I have to implement QoS on 3750 switch.I have two types of traffic received on that switch.I have two incoming links both of 10Mb. The outgoing link is 10Mb as well. I have high priority and low priority traffic coming to switch that passes through t...
HiI am using Cisco 1841 Router with only one Layer 3 Fe0 port and 8 Switch Ports. I have given IP on Fe0 port which is connected to another router. Now I don't know how to use the Switch Layer 2 ports of the router.I have tried making one of the port...
I don't have access to exact switches and firewalls but what I did was to replicate the same scenario in my EVE-NG lab and I noticed I have the same issue here so I must be doing something stupid.Configurations:!interface GigabitEthernet0/1nameif out...
yes I applied access list to permit all traffic.The other NAT entry for the directly connected switch to Firewall is working without any issues.access-list PASS extended permit ip any anyaccess-group PASS in interface outsideaccess-group PASS out int...
It was initially set to Auto Auto which is setting it to 100Mb so all the drops were at L2 SW.I removed all the Layer 2 inbetween switches and set interface speed to 10 Mb between Router B and 3750 and drops at 3750 egress interface but still PQ didn...
