Hello , can someone give an answer?if after having an active peer-link port-channel between a couple of nexus 7010 I change lacp system-priority on both boxes and then I add a new member interface on that port-channel , that interface will be aligned...
we have to upgrade to nxos 5.2(4) but i cannot find same image for epld , i only see a downlable image with version 5.2(3).Do you see any problem if we upgrade kick and system image to 5.2(4) with epld 5.2(3)?
hello , i have a similar situation with my asr9010 , i have put preferred path tunnel x under pseudowires to reach e remote pseudowire loopback. how can i check that effectively the mac address to destination PE are taking the wanted physical links c...
Hi, i have vpls with two vfi used for two different ce. I have conf two tunnel but on igp routing table ospf one tunnel is used as next hop for Both remote pw loopbacks and this si something i don’t want . I want the routing through first tunnel t...
Ciao Niko thanks for your feedbacks so far.
Consider we are speaking about copper ports (SFP-T) and we have 4 different connection to 4 different ports , all do not come up .On remote side there aren't SFPs , there are C3750 (copper ports).
Cabling t...
