Hi Josep, Is your sge2000 in layer 3 mode? Are the ports the pcs are connected to access or general? Latest firmware? Are pc1 and pc2 set to enable ping echo requests? Check the ip routes and ensure that the two networks are showing up as local under route type. Best, David
... View more
Here is my 2¢... from what you stated here: 3. The mobile devices are always assigned, but sometimes they are getting a correct IP (inside the defined range), and sometimes they are getting a incorrect IP (outside the range). We did this config in console mode: ip dhcp excluded address 192.168.1.1 192.168.1.180 ip dhcp excluded address 192.168.1.190 192.168.1.254 ip dhcp pool aphall network 192.168.1.0 /24 lease 1 default-router 192.168.1.70 dns-server 192.168.1.235 126.96.36.199 domain-name hall.hallinside.com So, the range 192.168.1.181 192.168.1.189 is the range assigned from our Domain Controller. And it works perfectly on laptops (verified looking the ipconfig) You have the AP dhcp scope and the DC dhcp scope on the same subnet, so this doesn't mean that the AP will exclude dhcp from the DC if the DC responds first. The excluded is only for the AP dhcp scope. Your default router is 192.168.1.70... is this correct? this has to be the same gateway as what is configured on your router. .70 is kind of wierd for a /24 subnet. What is your scope options on the DC dhcp? There is no need to have two dhcp scope on the same subnet unless you have a backup dhcp.
... View more