Hello Cisco,I have seen a few cases with what appear to be bogus counter increments on multiple ports for example as follows:fc2/15 is up Port description is VMAX 601194-FA08F1 Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) ...
We are seeing the following meassages:2012 Jan 17 03:25:20 MDSBDC09 Jan 17 03:25:20 %KERN-4-SYSTEM_MSG: EXT3-fs warning: checktime reached, running e2fsck is recommended - kernel2012 Jan 17 03:30:28 MDSBDC09 Jan 17 03:30:28 %KERN-4-SYSTEM_MSG: EXT3-f...
Since upgrade to 5.0(4d) on MDS9513 the following command doesn't work (worked with previous versions) - MDS1# sh ip intInternal error during command execution (11 8b) MDS1# 2011 Oct 14 14:57:23 MDS1 %VSHD-2-VSHD_SYSLOG_EOL_ERR: EOL function ipconf_s...
Hi all,I have an MDS9124 with only 1 powersupply (as shipped)This is leading to Module Warning in Fabric Manager.Is there anyway of clearing this status in FM?cheers,
Has anyone seen any issues with using the output redirection character with newer NXOS versions?Am receiving "Error 0x40870004 while copying."Simply copying a file from bootflash to tftp is ok.This occurs for both 3CDaemon and Tftpd32 softwares.Have ...
We see that the switch did run the e2fsk successfully and fix those errors.e2fsck 1.27 (8-Mar-2002)/dev/hd-cfg0: recovering journalPass 1: Checking inodes, blocks, and sizesPass 2: Checking directory structurePass 3: Checking directory connectivityPa...
Hi Vu,Thanks for your reply.Per your response:'You may need to purchase an adition power supply for redudancy as well as suppress the messages'What do you mean 'suppress the messages' - How do you do this in this instance?thanks!