About Rowlands Price

Rowlands Price · 12-09-2023

Hi supporti connected a nexus 3k to catalyst 2960 using SFP with fiber but the interfaces not coming UP.From the 3k side the interface is blinking and the port is connected.From the Cat 2960 the interface is not connected and not blinking.when i'm us...

Rowlands Price · 12-06-2023

Hi Support,i have a nexus 3k and i want to configure ospf with a stub area (area 10)i want all the connected networks be on that stub areaattached is the diagram and the nexus configRegards

Rowlands Price · 12-03-2023

Hi Support,I have two L3 switches connected with OSPF with backbone are 0switch 2 as many vlans with interface vlans created for usersit's better to create a stub area zone in switch 2 ?What is the best designregardsAttached is the scheme

Rowlands Price · 12-02-2023

Hi supportI enable OSPF between Nexus switch and Catalyst, the ospf is up, but the issue is that Nexus doesn't redistribute it's static routes configure to ospf instance.the static routes in nexus are bellow.192.168.10.0 255.255.255.0 11.0.0.2192.168...

Rowlands Price · 08-05-2022

Hi supporti just configured a ipsec vpn between an new cisco router C1121-4P and Cisco ASA 5525-X but it's not working.i have an old tunnel between a router 2921 and the same ASA and it worked properly.attached is the C1121 router's configuration.can...

Rowlands Price · 12-10-2023

Hi M02here are the version of nexus dans catNexusNEXUS# sh versionCisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tacCopyright (C) 2002-2019, Cisco and/or its affiliates.All rights reserved.SoftwareBIOS: version 01.14NX...

Rowlands Price · 12-10-2023

Hello M02, the both ports are trunksNEXUSinterface Ethernet1/2switchportswitchport mode trunkno shutdownCatalyst 2960interface GigabitEthernet1/0/28switchport mode trunk

Rowlands Price · 12-09-2023

@Kasun Bandara here are the switches model N3K-C36180YC-R & WS-C2960S-48LPS-L the SFP model is Cisco GLC-SX-MM and the fiber used is multimode.when plugging the SFP to device, it's accepted, but when connecting the fiber, from Cat nothing happened f...

Rowlands Price · 12-06-2023

Hi MHM, do you have an idea of configuring a stub area on nexus 3k?i did it well on catalyst

Rowlands Price · 12-06-2023

Ok, you are right, now can i have the config of stub areai have done the lab with distributed static and connected now i need the config with stub area and i will choose one

Member Since	‎05-11-2011 02:11 AM
Date Last Visited	‎12-20-2023 10:23 PM
Posts	160
Total Helpful Votes Received	15

User Statistics

User Activity

Connexion between nexus 3k and catalyst 2960 not coming up

Ospf Stub Area configuration on nexus 3k

Best Design OSPF with Stub Area or Not

Static routes redistribution in Nexus with OSPF

Site-to-site VPN between Router C1121-4P and ASA 5525-x don't work

Re: Connexion between nexus 3k and catalyst 2960 not coming up

Re: Connexion between nexus 3k and catalyst 2960 not coming up

Re: Connexion between nexus 3k and catalyst 2960 not coming up

Re: Ospf Stub Area configuration on nexus 3k

Re: Ospf Stub Area configuration on nexus 3k