Every packet on trunk has to be tagged except packets that doesn't belong to any vlan, are untagged thus belong to native vlan (dot1q).RegardsM Sent from Cisco Technical Support Android App
Dear concerned,Try to configure link add trunk instead of access vlan and allow only desire vlan on itI. eSwitchport trunk allowed vlan 2 See If it solves your problem or notI f notNext step, change it from pagp to lacp RegardsM Sent from Cisco Tech...
Dear,
Can you please verify if the dialer interface is up or not, if its up it must have installed a default route towards dialer interface.
Modify the configs as followed
Modify 4.2.2.2 in IP slap 1 and change it to 4.2.2.1 and leave ipsla2 as i...
A good solution has already been posted,Alternating solution could be to put distribute-list in on RTB and deny default route while receiving others. RegardsM Sent from Cisco Technical Support Android App
