cuilingfeng
Level 1
Level 1
Member since ‎06-18-2015
‎06-23-2021

User Statistics

  • 28 Posts
  • 1 Solutions
  • 90 Helpful votes Given
  • 34 Helpful votes Received

User Activity

我一台 3750-X 升级了版本 然后重启出现 版本是许多PSSS版本是Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE5, RELEASE SOFTWARE (fc1)Front-end Microcode IMG MGR: found microcode images for 4 devices.Image for front-end 0: flash:/front_end_ucode...
请问 3560G SVI 手工绑MAC可以吗? 我在接口下打? 没有MAC 开头的命令!:'(
大家好:我两台ASR9010做的集群,ASR9010是双RSP,现在control-link 是4对~show nv edge control control-link-protocols location 0/rsP0/cpu0Priority lPort Remote_lPort UDLD STP======== ===== ============ ==== ========0 0/RSP0/CPU0/0 ...
先给个拓扑 简单的 7609-----3750---3560 3750 做二层交换机用7609 和 3560 上都起来个SVI 口 都是 SVI 2 地址同一网段我7609 上 手工绑定了ARP原先 7609 和 3560 的 svi 能通信有次 3560 因断电 重启了下 发现 SVI 不通,事后发现 7609的 那条ASR上的mac错了。(肯定是3560上SVI的mac 变了-- 7609 没动过)请问大家遇到过IOS三层交换机重启后(掉电),SVI的MAC 变化的情况吗?
之前两台3750-x 做了堆叠,现在如何去除堆叠。求助!谢谢
Community Statistics
Member Since ‎06-18-2015 06:15 PM
Date Last Visited ‎06-23-2021 12:48 AM
Posts 28
Total Helpful Votes Received 34
Helpful Votes From
Helpful Votes Given To