About dballard99

dballard99 · 01-22-2008

I have 3 sites. one is HQ and the other two are branches. The branches connect to HW via serial lines and the Branches connect to each other via Fast Ethernet lines. I would like to give the sites a default route via eigrp ip summary commands and ha...

dballard99 · 01-25-2008

show vlan trunk will display vlan and ports allowed. set trunk example: set trunk 5/17 on dot1qor set trunk

dballard99 · 01-25-2008

show vlan trunk will display vlan and ports allowed. set trunk example: set trunk 5/17 on dot1q

dballard99 · 01-25-2008

check your arp table and make static entries if necessary.

dballard99 · 01-23-2008

Have you tried HSRP, VRRP or GLBP?

dballard99 · 01-23-2008

I set the bandwidth and delay on the fast ethernet interfaces, set the passive interface on both remote routers and implemented a floating static route with a AD of 91. thanks for your help.

Member Since	‎07-19-2007 02:11 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

pushing default route via eigrp

Re: CatOS command for trunking

Re: CatOS command for trunking

Re: Unable to ping printers

Re: Failover between WIC's

Re: pushing default route via eigrp