About lostrouter

lostrouter · 08-21-2014

**Edit**To add more to this, somehow I missed it but I had quite a few CRC errors on the outside interface. I switched the FastEthernet0/0 to speed auto, duplex auto and now I am getting about 45Mbps download speed. I would still like to see the r...

lostrouter · 07-21-2014

I have a 1921 router plugging into Charter coax. The routers Gi0/0 is being assigned a dynamic IP address to the outside. My question is simply how should I route to the outside world when I do not know the IP of the gateway as it might change. I w...

lostrouter · 06-03-2014

I am looking for a simple way to have my users failover internet traffic if our primary line fails. Currently I have a 100/100 fiber connection to the internet running through an asa5515x. I also have a aDSL line running on a 2801 series router han...

lostrouter · 10-10-2013

I have an ASA 5505 running 8.2. On my outside interface I am getting the IP address from my provider via ip address dhcp setroute. On my inside network I am providing DHCP to my clients via dhcpd. My question is simply is there a way I can pass my...

lostrouter · 06-19-2012

I have a Cisco 881 setup with the following VPN config.crypto isakmp policy 12 encr 3des hash md5 authentication pre-share group 2!crypto isakmp client configuration group MyVPN key myKEY dns 192.168.1.2 pool vpnuser acl 101!!crypto ipsec transform-s...

lostrouter · 08-21-2014

I have tried this and I have not seen any noticeable speed improvements. Still sitting around roughly 7mbps speed. I just can not believe the 1841 is so old that it can not handle the connection speeds.

lostrouter · 07-21-2014

That is heartbreaking that it was that simple!Cheers thank you

lostrouter · 10-10-2013

This worked Jouni, thank you very much. I added dhcpd auto_config outside interface insideThank you for the quick response sure appreciate it!

lostrouter · 06-19-2012

Ok I tried the following changes. I removed the ACL from my crypto isakmp client config.I added a new VLAN network 172.16.1.0 /29, I gave the vpnuser pool 172.16.1.2 - 172.16.1.6. I also changed my route map acl to the following.access-list 100 pe...

lostrouter · 07-03-2006

Ok this worked out just fine, I just needed to do deny ip 224.0.0.0 15.255.255.255 any...I guess my question is why I would need to do this? I already had an access-list setup on my inbound traffic. I thought at the end of all access-lists there wa...

Member Since	‎12-14-2005 06:06 AM
Date Last Visited	‎08-01-2018 02:27 AM
Posts	33

User Statistics

User Activity

Extremely poor internet performance 1841

Default gateway configuration

Active Passive Internet Connection?

ASA 5505 DHCP/DNS question

Cisco VPN Client unable to gain access to VPN network resources.

I have tried this and I have

That is heartbreaking that it

ASA 5505 DHCP/DNS question

Cisco VPN Client unable to gain access to VPN network resources.

Re: Filter multicast 224.0.0.0/4