Seems like a reasonable request. The uc320w does allow you to route inbound calls from each fxo port to specific extensions. You can also map fxo ports and sip trunks for out bound dialing. Shouldn't be a problem. Sent from Cisco Technical Support iPhone App P.S. The receptionist would love the side car. Our receptionist loves single button transfers. ... View more

Chris, I see what you mean by indicating the status of the forced night button, but I do believe that everyone installing these systems would like to see the button indicating the status of the phone system. Your average phone end user is not going to understand that the green force night button has no ties to the actual status of the phone system. They are simply going to see a green light before or after hours and think the system is in day mode. In my opinion there should be one force night button that functions as is but also indicates the systems status. I realize this may be a challenge because the force night override actually stops the automatic schedule until pressed again, resuming automatic schedule. The best solution I can think of (if at all possible) would be to have the force night button lit in the following status indications: 1.) red - system in night mode (auto schedule enabled) 2.) green - system in day mode (auto schedule enabled) 3.) orange - auto schedule disabled (forced night) This would really help the end user understand what mode they are in while still maintaining the ability to have manual control of the system without using a second button. Sent from Cisco Technical Support iPhone App ... View more

Gmail works. Thanks for the help. Sent from Cisco Technical Support iPhone App ... View more

if there are more extensions than phones I assume you are just needing voicemail for each employee? If that is the case you create users with assigned extensions and voicemail boxes. Then set up a cheap spa301 in a common area. Now each employee without a phone can check voicemail at the 301 by dialing the vm pilot, press * then follow prompts to check vm. Or you could do voicemail to email. Sent from Cisco Technical Support iPhone App ... View more