Currently we are using 7206VXR router with IOS image c7200p-ipbasek9-mz.124-15.T9.bin & using OSPF as a routing protocol.We are planning to move in to BGP as routing protocol .Kindly advice on
Hi,Is temperature monitoring via snmp supported on Cisco 2801 routers? when i perform a snmpwalk i donot get the associated value for the oids.Regards,K K Mahesh
Hi,Does the DS-SFP-GE-T support configurable port speeds(10/100/1000)? We want to have our san extensions to be configured directly from the MDS 9222i (2 each at all the locations) at our primary site to near site for synchronous replication and near...
[root@cacti ~]# snmpwalk -v2c -c callservices 10.81.208.4 1.3.6.1.4.1.9.9.63.1.3.8.1.1.2.2 CISCO-SMI::ciscoMgmt.63.1.3.8.1.1.2.2 = No Such Object available on this agent at this OIDshouldn't it be (snmpwalk -v2c -c callservices 10.81.208.4 .1....
Hi Vinod,I had checked for the temperature info through CLI and below is the output,#sh environment ? all All environmental monitor parameters last Last environmental monitor parameters table Temperature and voltage ranges | Output mod...
